Wax Melts

For you get the maximum results from your wax melts whilst maintaining safety at all times we recommend that you follow our user instructions.

We recommendation that our wax melts should only be used in an appropriate wax melter which is on a heat resistant surface.

Oil burners are often purchased as wax melt melters but pose significant fire risks, as well as causing your wax to overheat and lose it’s scent too quickly.

To use, simply break off a pieces(s) – depending on the size of your burner. Switch on your melter if electric or light the tealight. Be careful not to over fill to avoid spillages. The average burner would take 2-3 squares of a snap bar. Keep burning & re-burning until you can no longer smell the scent. Replace with wax melts & repeat the process.

To remove the old wax, wait until the wax cools and then gently place pressure on one end of the wax until it pops out. Do not use metal or sharp objects to clean out wax as this may crack or damage the burner or cause injury. Alternatively light the burner, wait until the wax melts and then soak up the wax with cotton wool balls. Only clean your burner with non flammable materials.

The intensity of your scent will depend on your room size, temperature of the room and amount of wax used. For best results, always close your windows in the room you are burning the wax.

Never leave a wax burner unattended.

Keep your burner clean and check for cracks before each use.

Only use plain 4 hour tealights and allow to cool after each tealight. Before lighting, make sure your tealight hasn’t gathered any dust or debris.

Never attempt to move a lit burner.

Keep out of reach of children and pets.

Store your wax in a cool place away from direct sunlight.

Avoid contact with eyes and skin, if contact occurs, flush with water. If irritation persists seek medical assistance.

Failure to follow instructions could result in fire hazard or serious injury.

We are CPL compliant, and each scent has it’s own CPL label.  If you would like to know what the CPL information before purchasing please drop us a message.


Our candles weigh approximately 180g and have a burn time of up to 30-40 hours if cared for correctly. 


  • Always burn for 3-4 hours for the first burn to allow a proper pool

  • Do not burn for longer than 4 hours at a time

  • Keep burning candles at least 10cm from each other and on an even, heat resitant surface

  • Do not burn near a draft or near anything that could catch fire

  • Trim the wick after every use (only trim the wick when the candle has cooled down and is not hot) and keep the melt pool free from debris

  • After each burn, ensure the wick is above the wax, upright and central before the candle sets again. Do not allow the wick to touch the container.


Never leave a burning candle unattended. Keep away from children and pets.